# Applying the API instructions in KNIME

**URL:** <https://forum.knime.com/t/applying-the-api-instructions-in-knime/47045>\
**Category:** KNIME Analytics Platform\
**Created:** [September 13, 2022, 2:28pm UTC](https://forum.knime.com/t/applying-the-api-instructions-in-knime/47045 "2022-09-13T14:28:46Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![qqilihq](https://forum-cdn.knime.com/user_avatar/forum.knime.com/qqilihq/32/50_2.png) [@qqilihq](https://forum.knime.com/u/qqilihq)\
**Post date:** [September 18, 2022, 10:39am UTC](https://forum.knime.com/t/applying-the-api-instructions-in-knime/47045/9 "2022-09-18T10:39:11Z")

</div>

Hi Badger,

thanks for the feedback!

> - I keyed in my API & Secret Keys, and proceeded with the Authorize button. But nothing occurred. (No browser window pops out)

1. Currently some errors are logged to the console\*, but might be filtered out if your log level is too high. You can enable `DEBUG` logging and probably see some helpful output in the console.

2. If you’d see the `DEBUG` log, I’d highly suspect that you’ll see something like this along the lines:

3. If that’s the case, you’ll need to set up “User authentication set up” in your Twitter project:

I’m still collecting plenty of feedback for this node, so please do let me know if that helps!

Best,  
Philipp

\*) We’ll improve this in the next release to show a proper error dialog as console output usually just gets lost

---

_[View the full topic](https://forum.knime.com/t/applying-the-api-instructions-in-knime/47045)._