# Batch mode issues (linux)

**URL:** <https://forum.knime.com/t/batch-mode-issues-linux/75429>\
**Category:** KNIME Analytics Platform\
**Created:** [November 20, 2023, 11:30am UTC](https://forum.knime.com/t/batch-mode-issues-linux/75429 "2023-11-20T11:30:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![evert.homan\_scilifelab.se](https://forum-cdn.knime.com/user_avatar/forum.knime.com/evert.homan_scilifelab.se/32/18181_2.png) [@evert.homan\_scilifelab.se](https://forum.knime.com/u/evert.homan_scilifelab.se)\
**Post date:** [November 20, 2023, 11:30am UTC](https://forum.knime.com/t/batch-mode-issues-linux/75429/1 "2023-11-20T11:30:37Z")

</div>

Hi,

I am trying to set up batch mode to be able to run scheduled workflows, starting with one that works fine in the GUI. I read up here: [https://www.knime.com/faq#q12](https://www.knime.com/faq#q12)

But even entering

`knime -nosplash -application org.knime.product.KNIME_BATCH_APPLICATION​`

throws an error, logging to the configuration directory of the KNIME installation folder (see attached). What stands out is the following:

`java.lang.RuntimeException: Application "org.knime.product.KNIME_BATCH_APPLICATION​" could not be found in the registry.`

Is my installation lacking something?

Thanks/Evert

[1700479071256.log](https://forum.knime.com/uploads/short-url/sr6dNjiLPPzxJ7vp9WrCAaU9NOw.log) (3.5 KB)

---

<div class="post-metadata">

**Author:** ![evert.homan\_scilifelab.se](https://forum-cdn.knime.com/user_avatar/forum.knime.com/evert.homan_scilifelab.se/32/18181_2.png) [@evert.homan\_scilifelab.se](https://forum.knime.com/u/evert.homan_scilifelab.se)\
**Post date:** [November 20, 2023, 11:45am UTC](https://forum.knime.com/t/batch-mode-issues-linux/75429/3 "2023-11-20T11:45:38Z")

</div>

Hi,

The problem remains when I run it from under the installation directory. There are no extra spaces anywhere in my command:

`evehom  /  opt  knime  knime_5.1.0  knime -nosplash -application org.knime.product.KNIME_BATCH_APPLICATION​`

`CompileCommand: exclude javax/swing/text/GlyphView.getBreakSpot bool exclude = true`

After this the error message window pops up, stating:

An error message has occured. See the log file /opt/knime/knime\_5.1.0/confugurations/xxx.log for details

I sincerely hope this can be solved without reinstalling KNIME and all the nodes…

---

<div class="post-metadata">

**Author:** ![evert.homan\_scilifelab.se](https://forum-cdn.knime.com/user_avatar/forum.knime.com/evert.homan_scilifelab.se/32/18181_2.png) [@evert.homan\_scilifelab.se](https://forum.knime.com/u/evert.homan_scilifelab.se)\
**Post date:** [November 20, 2023, 11:54am UTC](https://forum.knime.com/t/batch-mode-issues-linux/75429/4 "2023-11-20T11:54:36Z")

</div>

OK, so I downloaded 5.1.2 and quickly tested the command

`knime -nosplash -application org.knime.product.KNIME_BATCH_APPLICATION`

It still throws the CompileCommand warning but after that I see all the batch mode options in the terminal.

So apparently something funky with my 5.1.0 installation…

Thanks for your suggestions/Evert

---

<div class="post-metadata">

**Author:** ![system](https://forum-cdn.knime.com/uploads/default/original/1X/ab3ccf34482a0329361734a18199390177204f15.png) [@system](https://forum.knime.com/u/system)\
**Post date:** [February 20, 2024, 2:00pm UTC](https://forum.knime.com/t/batch-mode-issues-linux/75429/7 "2024-02-20T14:00:05Z")

</div>

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.